The Ultimate Guide to Fix Your BCD SSD Like a Pro: Expert Tips and Tricks!

If you use a solid-state drive (SSD), then you probably know that it’s one of the fastest and most reliable types of storage available. However, like any electronic device, it’s not immune to errors. One of the most common errors that can occur with an SSD is the BCD (Boot Configuration Data) error.

This type of error can prevent Windows from starting up properly, and in some cases, it can even render your computer unusable. If you’re experiencing this issue, don’t panic! There are several things you can do to fix the BCD SSD error. In this blog post, we’ll cover some effective methods for troubleshooting and resolving this problem, so you can get your computer up and running again in no time.

Check Physical Connections

BCD SSD is a common problem that many people face when trying to start up their computer. One solution to fix this issue is to check the physical connections of the SSD. First, make sure that the SATA cables are correctly connected and that the screws are tightened.

Next, check to see if the power cable is plugged in properly and that the power supply unit is functioning correctly. If all cables are connected correctly, then it is time to check the BIOS settings. Sometimes, the computer boot order needs to be changed to prioritize the SSD over other storage devices.

By properly checking physical connections, the BCD SSD error can be resolved and your computer can start up without any issues.

Ensure SSD is Properly Connected to Motherboard and Power Supply

One of the most common issues when dealing with SSDs is a faulty connection, which can cause various problems like slow boot times, data errors, and system crashes. To ensure your SSD is properly connected to your motherboard and power supply, start by checking the physical connections. This means making sure the SATA cable is securely plugged into both the motherboard and the SSD, as loose connections can cause unexpected issues.

Additionally, double-check that the power connector is also firmly attached to the drive. If you’re unsure about the connections, try reseating the connectors and checking again. Remember, even a small disconnection or poor contact can cause major headaches, so it’s critical to pay attention to the details.

bcd ssd how to fix

Verify SATA Cables are Securely Attached

If your computer is encountering issues, the SATA cables are one of the components that may cause problems. It’s critical to ensure that they are properly attached and secure, as loose connections may cause data transfer problems that lead to computer dysfunction. Some SATA cables may become unplugged due to dislodgement or because they’re not connected properly from the start, causing the system to malfunction.

So ensure to double-check that all cables are properly plugged in and correctly seated. If your computer has an error message indicating that it is missing or improperly connected to a SATA drive, verify that the cable is firmly secured. This straightforward step may save you time and money in the long term by avoiding costly and unnecessary repairs.

Use Command Prompt

When it comes to fixing issues with your SSD drive, using the command prompt can be a helpful tool. The bcdedit command can help fix boot issues by editing the Windows Boot Manager settings. First, open an elevated command prompt and type “bcdedit /enum” to see a list of entries in the boot configuration data store.

Look for the Windows Boot Manager entry and note its identifier. Then, type “bcdedit /set {bootmgr} device partition=[SSD drive letter]” to set the SSD as the default boot device. Ensure that the SSD is listed as the default device by typing “bcdedit /enum {bootmgr}.

” Restart your computer and the changes should take effect. By using the command prompt, you can fix boot issues and make your SSD drive the primary boot device.

Run Command Prompt as Administrator

If you’re a computer user and like to tinker with system settings, you may have come across instances where you need to run Command Prompt as an administrator. For instance, some tasks like installing software, checking for system errors, or tweaking network settings require elevated access. In such cases, the standard Command Prompt won’t cut it.

Instead, you need to launch the Command Prompt as an administrator to gain full access to all system resources. The process is simple: search for ‘Command Prompt’ on the start menu, right-click on it, and select ‘Run as administrator.’ This way, you’ll get an elevated command prompt that can execute any command, including those that require administrative rights.

By using this method, you can run any command that only an administrator has the authority to execute swiftly.

Enter Command ‘bootrec /fixboot’ and Press Enter

If your Windows computer is encountering booting issues, then using the command prompt can be useful in fixing the problem. One command you can try is “bootrec /fixboot”. This command helps to fix any boot sector problems that may be preventing your system from booting correctly.

When you enter this command, it scans your computer for any issues with the boot partition and attempts to repair them. This is a useful command to use if you’ve recently installed a new operating system or made any changes to your computer’s hardware, which may cause conflicts with the boot sector. Using this command can help to resolve any issues and get your computer up and running again.

So, give it a try if you’re experiencing booting problems with your Windows computer.

Enter Command ‘bootrec /rebuildbcd’ and Press Enter

If you’re experiencing problems with your Windows operating system booting up properly, you may be able to use the Command Prompt to fix the issue. One helpful command to know is ‘bootrec /rebuildbcd.’ This command can rebuild the boot configuration data for your system, potentially resolving any issues that may be preventing your computer from booting up correctly.

To use this command, open the Command Prompt and type ‘bootrec /rebuildbcd,’ then press Enter. Your computer will begin scanning for installations of Windows on your system and will prompt you to add any that it finds. Once the process is completed, you should restart your computer to see if the issue has been resolved.

Remember to use caution when entering commands into the Command Prompt, as they can have significant effects on your system.

Repair Windows Installation

If you’re experiencing issues with your Windows installation caused by a corrupted BCD on an SSD, you may be wondering how to fix it. Thankfully, repairing a Windows installation can be relatively straightforward. Firstly, you’ll need to create a bootable USB drive with an installation media for your Windows operating system.

Once you’ve done this, boot your computer from the USB drive and select “Repair your computer”. This will take you to the Advanced Startup Options menu. From there, choose “Troubleshoot” and then “Advanced options”.

Under “Advanced options”, select “Command Prompt”. Once you’re in the Command Prompt, you can run a variety of commands to fix your BCD. These commands may include bootrec /fixmbr, bootrec /fixboot, and bootrec /rebuildbcd.

Once you’ve run these commands, exit the Command Prompt and restart your computer. With any luck, your Windows installation should now be repaired and your BCD and SSD should be working normally again.

Use Windows Installation Disc or USB Drive

One of the best ways to repair a Windows installation that has gone awry is to use a Windows installation disc or USB drive. This tool is incredibly useful as it can help you repair your operating system in just a few easy steps. Simply insert the installation disc into your computer and restart it.

Then, follow the on-screen instructions to choose your language preference, enter your product key, and agree to the license terms. Next, select “Custom Install” and then “Upgrade” to begin the Windows installation repair process. This process will take some time, but once it is complete, your computer should be back to its normal working condition.

In summary, the use of a Windows installation disc or USB drive is an effective way to repair a damaged operating system and get your computer back up and running in no time.

Select ‘Repair Your Computer’ Option

If you’re facing issues with your Windows operating system and need to troubleshoot, the ‘Repair Your Computer’ option can be a life-saver. This option can be accessed by booting your system with a Windows installation media. Once you boot your system, choose the ‘Repair Your Computer’ option to begin repairing your Windows installation.

This will launch the Windows Recovery Environment (WinRE) , which contains various advanced tools for diagnosis and repair purposes. You can use the ‘Startup Repair’ tool to automatically repair any issues that are preventing your Windows operating system from booting up. Alternatively, you can use the ‘System Restore’ tool to restore your system to an earlier restore point.

This can be helpful if you’ve recently made any changes to your system that might have caused issues. If nothing seems to work, then the last resort would be to use the ‘System Image Recovery’ tool to restore your system from a previously backed-up image. In conclusion, the ‘Repair Your Computer’ option is a handy tool that can help you troubleshoot and fix a variety of issues with your Windows installation.

Replace Faulty SSD or Motherboard

Have you ever encountered the dreaded “BCD SSD” error message on your computer? This error typically occurs when your computer’s boot configuration data (BCD) is corrupted. One of the common causes of BCD SSD errors is a faulty SSD or motherboard. If you’re experiencing this issue, you can try to fix it by replacing the faulty hardware component.

First, you should try to isolate the problem by performing a diagnostic test on your computer’s hardware components. If the test reveals that your SSD or motherboard is faulty, you can replace the component with a new one. Just be sure to check the compatibility of the replacement hardware with your computer’s specifications before making the purchase.

By replacing the faulty hardware component, you can fix the BCD SSD error and get your computer back up and running smoothly again.

Consider Seeking Professional Help for Replacement Process

If you’re experiencing issues with your SSD or motherboard, it’s important to consider seeking professional help for the replacement process. While it may seem like a simple task, replacing faulty hardware can be complex and require a level of expertise that the average person may not have. A professional technician can troubleshoot the issue, diagnose the problem, and recommend the best course of action.

They can also ensure that the replacement components are compatible with your system, preventing any further problems down the line. It’s tempting to try to tackle the replacement yourself, but in the long run, it may end up costing you more time and money. By seeking professional help, you can have peace of mind knowing that your system is in good hands.

So, if you’re experiencing any issues with your SSD or motherboard, consider reaching out to a professional technician to help you get back up and running.


At the end of the day, a malfunctioning BCD SSD can be a real headache. However, with a little bit of technical expertise and the right tools, fixing it should be no sweat. So don’t give up on your computer just yet.

Keep your wits about you, and soon enough, you’ll be back to surfing the web and streaming your favorite shows in no time!”


What is a SSD?
SSD stands for Solid State Drive. It is a storage device used to store data on a computer system.

How does SSD differ from HDD?
SSDs use flash memory to store data, while HDDs use spinning disks. SSDs are faster and more durable than HDDs.

What are the benefits of using SSD over HDD?
SSDs provide faster read and write speeds, are more durable, produce less heat and noise, and use less power compared to traditional hard disk drives.

How can I fix a corrupted SSD?
You can try running a disk checking tool like CHKDSK or use disk repair software like EaseUS Partition Master or MiniTool Partition Wizard to fix any disk errors.

My SSD is not showing up in my computer, how can I fix it?
First, check if the SSD is properly connected to the computer. If it is connected, try updating the drivers or checking if the drive is recognized in the disk management tool. If all fails, the drive may be defective and need to be replaced.